VNH5019ATR-E Motor Driver ICs by STMicroelectronics

Automotive fully integrated H-bridge motor driver

Semiconductors - ICs
> Power Management ICs - PMIC
> Drivers & Controllers
> Motor Drivers / Controllers
Status: Active
Series: VNH5019A-E
RoHS: Compliant
Download Datasheet Visit Manufacturer Site View Pricing & Stock
The VHN5019A-E is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side drivers and two low-side switches. The high-side driver switch is designed using STMicroelectronics’ well known and proven proprietary VIPower ® M0 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuit. The three dice are assembled in a MultiPowerSO-30 package on electrically isolated lead-frames. This package, specifically designed for harsh automotive environments offers improved thermal performance thanks to exposed die pads. The input signals IN A and IN B can directly interface the microcontroller to select the motor direction and the brake condition. The DIAG A /EN A or DIAG B /EN B , when connected to an external pull-up resistor, enables one leg of the bridge. It also provides a feedback digital diagnostic signal. The CS pin allows to monitor the motor current by delivering a current proportional to its value when CS_DIS pin is driven low or left open. The PWM, up to 20 KHz, lets us control the speed of the motor in all possible conditions. In all cases, a low-level state on the PWM pin turns off both the LS A and LS B switches. When PWM rises to a high-level, LS A or LS B turns on again depending on the input pin state. Output current limitation and thermal shutdown protects the concerned high-side in short to ground condition. The short to battery condition is revealed by the overload detector or by thermal shutdown that latches off the relevant low-side. Active V CC pin voltage clamp protect the device against low energy spikes in all configurations for the motor. The CP pin provides the necessary gate drive for an external N-channel PowerMOS used for reverse polarity protection.

Where to Buy

Prices starting from US$4.24

Distributor Stock
Logo for element14 Singapore
element14
from US$6.39
41,619
in stock
 Buy Now
Logo for Farnell UK
Farnell
from US$5.43
36,533
in stock
 Buy Now
Logo for Future Electronics NA
Future Electronics
from US$4.24
27,000
in stock
 Buy Now
Logo for Ozdisan
Ozdisan
from US$5.20
1,215
in stock
 Buy Now
Logo for RS UK
RS
from US$8.05
940
in stock
 Buy Now
Logo for TME
TME
from US$7.85
899
in stock
 Buy Now
Logo for Newark
Newark Electronics
from US$7.31
551
in stock
 Buy Now
Logo for Avnet America
Avnet America
from US$4.28
0
in stock
 Buy Now
Logo for EBV Elektronik
EBV Elektronik
-
0
in stock
 Buy Now
Logo for Avnet Silica
Avnet Silica
-
0
in stock
 Buy Now
Buy Now

Features

AEC-Q100 qualified
ECOPACK®: lead free and RoHS compliant
Output current: 30 A
3 V CMOS compatible inputs
Undervoltage and overvoltage shutdown
High-side and low-side thermal shutdown
Cross-conduction protection
Current limitation
Very low standby power consumption
PWM operation up to 20 kHz
Protection against:
Loss of ground and loss of VCC
Current sense output proportional to motor current
Charge pump output for reverse polarity protection
Output protected against short to ground and short to VCC

Last 6 months Inventory & Pricing History

Alternative Descriptions

MOTOR DRIVER, AEC-Q100, MULTIPOWERSO-30 | element14
VNH5019 Series 24 V 30 A Automotive Full Bridge Motor Driver - MultipowerSO-30 | Future Electronics
H-Bridge motor driver | RS
IC: driver | TME
Motor Driver, Aec-Q100, Multipowerso-30 | Newark Electronics
H-Bridge Motor Driver 5.5V to 24V 30-Pin PowerSO T/R | Avnet America

Frequently Asked Questions

Where can I find additional details, specifications and documents for a VNH5019ATR-E?

Additional datasheets, footprints and schematics for VNH5019ATR-E are listed on our Part Details page. You can also find images and similar parts to VNH5019ATR-E on this page.

What pricing and inventory information can I view?

Distributor pricing and stock information is available for VNH5019ATR-E on our Product Comparison page. Access via the 'View Pricing & Stock' button to view VNH5019ATR-E price breaks, MOQs, lead times, inventory and SKUs from distributors.

What category does VNH5019ATR-E fall under?

The VNH5019ATR-E is listed under Automotive Analog and Power > Motor Driver ICs.

Can I view similar or alternative parts?

You can view similar parts to VNH5019ATR-E when available in the Motor Driver ICs range under the specifications section at the bottom of the details page.

Who can I contact for technical support of the product?

Submit any questions directly to the customer support team of the distributor listing the product. For the VNH5019ATR-E you can contact the distributor directly for product support, shipping queries etc.

Is the VNH5019ATR-E RoHS compliant?

Yes. This part has been flagged as RoHS Compliant by STMicroelectronics.

Which authorised distributors for VNH5019ATR-E have stock available?

Authorised distributors including element14, Farnell, Future Electronics, Ozdisan and RS have stock available or on a lead time for VNH5019ATR-E.

How do I check stock and lead times for all distributors?

Stock availability and lead times will be displayed for VNH5019ATR-E often in real-time on the comparison pages.

What if I can't find stock of VNH5019ATR-E?

You can fill out our help required form which you can use to request a quote for VNH5019ATR-E from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.