DSPIC33FJ128MC202-I/SP Digital Signal Controllers - DSC by Microchip Technology
16-bit DSC for Precision Motor Control
| Status: | Active |
|---|---|
| Series: | dsPIC33FJ128MC202 |
| RoHS: | Compliant |
Where to Buy
Prices starting from US$4.51
| Distributor | Stock | ||
|---|---|---|---|
|
Microchip Technology
from US$5.26
|
1,110
in stock
|
Buy Now |
|
Newark Electronics
from US$7.31
|
0
in stock
|
Buy Now |
|
Avnet America
from US$6.39
|
0
in stock
|
Buy Now |
|
TME
from US$6.36
|
0
in stock
|
Buy Now |
|
RS Americas
from US$5.39
|
0
in stock
|
Buy Now |
|
element14
from US$7.18
|
0
in stock
|
Buy Now |
|
Farnell
from US$4.51
|
0
in stock
|
Buy Now |
|
Avnet Silica
-
|
0
in stock
|
Buy Now |
| Buy Now |
Features
| Operating Conditions: |
|---|
| 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS |
| 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS |
| High-Performance DSC CPU: |
|---|
| Modified Harvard architecture |
| C compiler optimized instruction set |
| 16-bit wide data path |
| 24-bit wide instructions |
| Linear program memory addressing up to 4M instruction words |
| Linear data memory addressing up to 64 Kbytes |
| 83 base instructions: mostly 1 word/1 cycle |
| Two 40-bit accumulators with rounding and saturation options |
| Flexible and powerful addressing modes: Indirect, Modulo and Bit-Reversed Software stack |
| 16 x 16 fractional/integer multiply operations |
| 32/16 and 16/16 divide operations |
| Single-cycle multiply and accumulate: Accumulator write back for DSP operations and Dual data fetch |
| Up to ±16-bit shifts for up to 40-bit data |
| On-Chip Flash and SRAM: |
|---|
| Flash program memory |
| Data SRAM |
| Boot, Secure, and General Security for program Flash |
| Direct Memory Access (DMA): |
|---|
| 8-channel hardware DMA |
| Up to 2 Kbytes dual ported DMA buffer area (DMA RAM) to store data transferred via DMA |
| Allows data transfer between RAM and a peripheral while CPU is executing code (no cycle stealing) |
| Most peripherals support DMA |
| Timers/Capture/Compare/PWM: |
|---|
| Timer/Counters, up to five 16-bit timers: Can pair up to make two 32-bit timers |
| One timer runs as a Real-Time Clock with an external 32.768 kHz oscillator and Programmable prescaler |
| Input Capture (up to four channels): Capture on up, down or both edges |
| 16-bit capture input functions and 4-deep FIFO on each capture |
| Output Compare (up to four channels): Single or Dual 16-bit Compare mode and 16-bit Glitchless PWM mode |
| Hardware Real-Time Clock/Calendar (RTCC): Provides clock, calendar, and alarm functions |
| Interrupt Controller: |
|---|
| 5-cycle latency |
| 118 interrupt vectors |
| Up to 53 available interrupt sources |
| Up to three external interrupts |
| Seven programmable priority levels |
| Five processor exceptions |
| Digital I/O: |
| Peripheral pin Select functionality |
| Up to 35 programmable digital I/O pins |
| Wake-up/Interrupt-on-Change for up to 21 pins |
| Output pins can drive from 3.0V to 3.6V |
| Up to 5V output with open drain configuration |
| All digital input pins are 5V tolerant |
| 4 mA sink on all I/O pins |
| System Management: |
|---|
| Flexible clock options: External, crystal, resonator, internal RC, Fully integrated Phase-Locked Loop (PLL) and Extremely low jitter PLL |
| Power-up Timer |
| Oscillator Start-up Timer/Stabilizer |
| Watchdog Timer with its own RC oscillator |
| Fail-Safe Clock Monitor |
| Reset by multiple sources |
| Power Management: |
|---|
| On-chip 2.5V voltage regulator |
| Switch between clock sources in real time |
| Idle, Sleep, and Doze modes with fast wake-up |
| Analog-to-Digital Converters (ADCs): |
|---|
| 10-bit ADC, 1.1 Msps or 12-bit, 500 Ksps conversion: two and four simultaneous samples |
| Up to nine input channels with auto-scanning |
| Conversion start can be manual or synchronized with one of four trigger sources and possible in Sleep mode |
| ±2 LSb max integral nonlinearity and ±1 LSb max differential nonlinearity |
| Comparator Module: |
|---|
| Two analog comparators with programmable input/output configuration |
| CMOS Flash Technology: |
|---|
| Low-power, high-speed Flash technology |
| Fully static design |
| 3.3V (±10%) operating voltage |
| Industrial and Extended temperature |
| Low power consumption |
| Motor Control Peripherals: |
|---|
| 6-channel 16-bit Motor Control PWM: three duty cycle generators |
| Independent or complementary mode and programmable dead time and output polarity |
| Edge-aligned or center-aligned, manual output override control, and one Fault input |
| Trigger for ADC conversions |
| PWM frequency for 16-bit resolution (@ 40 MIPS) = 1220 Hz for Edge-Aligned mode, 610 Hz for Center-Aligned mode |
| PWM frequency for 11-bit resolution (@ 40 MIPS) = 39.1 kHz for Edge-Aligned mode, 19.55 kHz for Center-Aligned mode |
| 2-channel 16-bit Motor Control PWM |
| One duty cycle generator, Independent or Complementary mode and programmable dead time and output polarity |
| Edge-aligned or center-aligned, manual output override control and one fault input |
| Trigger for ADC conversions |
| PWM frequency for 16-bit resolution (@ 40 MIPS) = 1220 Hz for Edge-Aligned mode, 610 Hz for Center-Aligned mode |
| PWM frequency for 11-bit resolution (@ 40 MIPS) = 39.1 kHz for Edge-Aligned mode, 19.55 kHz for Center-Aligned mode |
| 2-Quadrature Encoder Interface modules |
| Phase A, Phase B, and index pulse input and 16-bit up/down position counter |
Specifications
| Architecture | 16 |
|---|---|
| MaxSpeed (MHz) | 40 |
| CPU Speed (MIPS/DMIPS) | 40 |
| Program Memory Size (KB) | 128 |
| Multiple Flash Panels | False |
| Direct Memory Access (DMA) Channels | 8 |
| Temp. Range Min. | -40 |
| Temp. Range Max. | 150 |
| Operation Voltage Min.(V) | 3 |
| Operation Voltage Max.(V) | 3.6 |
| Pin Count | 28 |
| Low Power | No |
| Number of Comparators | 2 |
| Number of ADCs | 1 |
| ADC Channels | 6 |
| Max ADC Resolution (bits) | 12 |
| Max ADC Sampling Rate (ksps) | 1100 |
| Number of DACs | 1 |
| DAC outputs | 0 |
| Max DAC Resolution (bits) | 4 |
| Hardware RTCC | No |
| Motor Control PWM Channels | 8 |
| SMPS PWM Channels | 0 |
| Number of PWM Time Bases | 2 |
| Output Compare Channels | 4 |
| USB Interface | None |
| Number of CAN Modules | 0 |
| Type of CAN module | None |
| Crypto Engine | No |
| Quadrature Encoder Interface (QEI) | 2 |
| Segment LCD | 0 |
| LCD/Graphics Interface | No |
| Configurable Logic Cell Modules (CLC /CCL) | 0 |
| Peripheral Pin Select (PPS)/Pin Muxing | Yes |
| Pins | Packaging | 28 | SPDIP |
| Temp Range | -40C to +85C |
| Packing Media | Tube (15) |
Last 6 months Inventory & Pricing History
Resources
Board Design Files |
|---|
| PIC24HJ128GP502 BSDL file |
Brochures |
|---|
| 16-bit Embedded Control Solutions Brochure |
| Motor Control and Drive Brochure |
| Electronic Solutions for Medical and Fitness |
| MPLAB® X IDE Product Overview |
Programming Specifications |
|---|
| 16-Bit MCU and DSC Programmer's Reference Manual |
| dsPIC33F/PIC24H Flash Programming Specification |
User Guides |
|---|
| Graphics Display Powertip 4.3" 480x272 Board |
| Graphics Display Truly 3.2" 240x320 Board |
| Graphics LCD Controller PICtail Plus SSD1926 Board |
Environmental Information
| JEDEC Indicator | e3 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 2.0875 |
| Shipping Weight (kg) | 3.733333 |
| Lead Count | 28 |
| Package Type | SPDIP |
| Package Width or Size | .300in |
| Soldering Composition | Matte Tin |
Alternative Descriptions
| 16 BIT MCU/DSP 28LD 40MIPS 128KB FLASH | Microchip Technology |
| Digital Signal Controller-Dsc, 16 Bit, 128Kb, 40Mhz 3.6V Dip-28 | Newark Electronics |
| MCU 16-bit dSPIC33 dsPIC RISC 128KB Flash 3.3V 28-Pin SPDIP Tube | Avnet America |
| IC: dsPIC microcontroller | TME |
| 16-BIT DSC, 28LD,128KB FLASH, MOTOR, DMA,40 MIPS, NANOWATT | RS Americas |
| IC, 16BIT MCU-DSP, SPDIP28 | element14 |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a DSPIC33FJ128MC202-I/SP?
Additional datasheets, footprints and schematics for DSPIC33FJ128MC202-I/SP are listed on our Part Details page. You can also find images and similar parts to DSPIC33FJ128MC202-I/SP on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for DSPIC33FJ128MC202-I/SP on our Product Comparison page. Access via the 'View Pricing & Stock' button to view DSPIC33FJ128MC202-I/SP price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does DSPIC33FJ128MC202-I/SP fall under?
The DSPIC33FJ128MC202-I/SP is listed under Semiconductors - ICs > Digital Signal Controllers - DSC.
Can I view similar or alternative parts?
You can view similar parts to DSPIC33FJ128MC202-I/SP when available in the Digital Signal Controllers - DSC range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the DSPIC33FJ128MC202-I/SP you can contact the distributor directly for product support, shipping queries etc.
Is the DSPIC33FJ128MC202-I/SP RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for DSPIC33FJ128MC202-I/SP have stock available?
Authorised distributors including Microchip Technology, Newark Electronics, Avnet America, TME and RS Americas have stock available or on a lead time for DSPIC33FJ128MC202-I/SP.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for DSPIC33FJ128MC202-I/SP often in real-time on the comparison pages.
What if I can't find stock of DSPIC33FJ128MC202-I/SP?
You can fill out our help required form which you can use to request a quote for DSPIC33FJ128MC202-I/SP from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.