ATSAMD21J18A-AF More Semiconductors - ICs by Microchip Technology
| Status: | Active |
|---|---|
| Series: | ATSAMD21J18 |
| RoHS: | Compliant |
A low-power, high-performance Microchip's ARM® Cortex®-M0+ based flash microcontroller, the ATSAMD21J18 is ideal for a wide range of home automation, consumer, metering, and industrial applications. It features:
- 256KB of flash and 32KB of SRAM
- Up to 48MHz operating frequency
- Six serial communication modules (SERCOM) configurable as UART/USART, SPI or I2C, five 16-bit timer/counters, 32-bit Real-Time Clock and calendar, 24 PWM channels, one 20-channel 12-bit ADC, one 10-bit DAC
- Full Speed USB Device and embedded Host
- Support for up to 256 touch channels
- 1.62V to 3.63V power supply
- Easy pin migration to SAMD21G and SAMD21J devices
Supported by MPLAB X IDE and MPLAB Harmony.
Functional Safety
This device supports the ISO 26262 (ASIL B), IEC 61508 (SIL 2) and IEC 60730 (Class B) functional safety standards.
· The Functional Safety Manual, FMEDA and information on the Diagnostic Software are available under NDA through the request form on the 32-bit Microcontrollers Functional Safety web page.
· To request any information about the SIL 2 STL, please fill out and submit the request form on Industrial Safety Self-Test Library web page.
· Learn more about 32-bit MCUs with Functional Safety capabilities including device hardware and certified software libraries.
Where to Buy
Prices starting from US$3.48
| Distributor | Stock | ||
|---|---|---|---|
|
Microchip Technology
from US$3.48
|
6,354
in stock
|
Buy Now |
|
RS
from US$3.98
|
438
in stock
|
Buy Now |
|
Newark Electronics
from US$4.09
|
331
in stock
|
Buy Now |
|
element14
from US$4.66
|
331
in stock
|
Buy Now |
|
Farnell
from US$4.63
|
331
in stock
|
Buy Now |
|
Future Electronics
from US$4.20
|
0
in stock
|
Buy Now |
|
Avnet America
from US$4.20
|
0
in stock
|
Buy Now |
|
TME
from US$3.81
|
0
in stock
|
Buy Now |
|
EBV Elektronik
-
|
0
in stock
|
Buy Now |
|
Avnet Silica
-
|
0
in stock
|
Buy Now |
| Buy Now |
Features
| Single-cycle hardware multiplier |
| Micro Trace Buffer |
| 256KB in-system self-programmable Flash |
| 32KB SRAM Memory |
| Power-on reset (POR) and brown-out detection (BOD) |
| Internal and external clock options with 48MHDigital Frequency Locked Loop (DFLL48M) and 48MHto 96MHFractional |
| External Interrupt Controller (EIC) |
| 16 external interrupts |
| One non-maskable interrupt |
| Two-pin Serial Wire Debug (SWD) programming, test and debugging interface |
| Drop in compatible with SAM D20 |
| Idle and standby sleep modes |
| SleepWalking peripherals |
| 12-channel Direct Memory Access Controller (DMAC) |
| 12-channel Event System |
| One 16-bit TC with compare/capture channels |
| One 8-bit TC with compare/capture channels |
| One 32-bit TC with compare/capture channels, by using two TCs |
| Up to four compare channels with optional complementary output |
| Generation of synchronized pulse width modulation (PWM) pattern across port pins |
| Deterministic fault protection, fast decay and configurable dead-time between complementary output |
| Dithering that increase resolution with up to 5 bit and reduce quantization error |
| 32-bit Real Time Counter (RTC) with clock/calendar function |
| Watchdog Timer (WDT) |
| CRC-32 generator |
| Embedded device function |
| Eight endpoints |
| USART with full-duplex and single-wire half-duplex configuration |
| I2C Bus up to 3.4MHz |
| SMBUS/PMBUS |
| SPI |
| LIN client |
| Differential and single-ended input |
| 1/2x to 16x programmable gain stage |
| Automatic offset and gain error compensation |
| Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution |
| 10-bit, 350ksps Digital-to-Analog Converter (DAC) |
| Two Analog Comparators (AC) with window compare function |
| 256-channel capacitive touch and proximity sensing |
| 52 GPIO pins |
| 64-pin TQFP, QFN, UFBGA |
| 1.62V – 3.63V |
Specifications
| Part Family | SAMD21 |
|---|---|
| CPU Type | Cortex-M0+ |
| MaxSpeed (MHz) | 48 |
| Program Memory Size (KB) | 256 |
| SRAM (KB) | 32 |
| Data EEPROM (bytes) | 0 |
| Temp. Range Min. | -40 |
| Temp. Range Max. | 125 |
| Operation Voltage Min.(V) | 1.62 |
| Operation Voltage Max.(V) | 3.63 |
| Direct Memory Access (DMA) Channels | 12 |
| SPI | 6 -SPI |
| I2C | 6 |
| UART | 6 |
| I2S | 1 |
| Ethernet | None |
| USB Interface | Full Speed |
| Number of USB Modules | 1 |
| Type of CAN module | None |
| Number of CAN Modules | 0 |
| Crypto Engine | No |
| Max ADC Resolution (bits) | 12 |
| Max ADC Sampling Rate (ksps) | 350 |
| ADC Channels | 20 |
| Max DAC Resolution (bits) | 10 |
| DAC outputs | 1 |
| Hardware Touch Peripheral | PTC |
| Number of Comparators | 2 |
| Motor Control PWM Channels | 14 |
| Quadrature Encoder Interface (QEI) | 0 |
| Internal Oscillator | 32khz, 32Khz ULP, 8Mhz |
| Hardware RTCC | Yes |
| Max I/O Pins | 52 |
| Pin Count | 64 |
| Low Power | Yes |
| Pins | Packaging | 64 | TQFP |
| Temp Range | -40C to +125C |
| Packing Media | Tray (160) |
Last 6 months Inventory & Pricing History
Resources
Data Sheets |
|---|
| SAM D21/DA1 Family Data Sheet |
Board Design Files |
|---|
| STK600-RC032SAM-79 |
| STK600-RC048SAM-78 |
| STK600-RC064SAM-87 |
| STK600-RC048SAM-88 |
| STK600-RC032SAM-89 |
| STK600-RC064SAM-72 |
Design Checklist |
|---|
| Basic 32-Bit MCU Design and Troubleshooting Checklist |
Miscellaneous |
|---|
| QTouch Library Selection Guide |
Environmental Information
| JEDEC Indicator | e3 |
|---|---|
| ROHS | Compliant |
| China EFUP | Compliant |
| Device Weight (g) | 0.2867 |
| Shipping Weight (kg) | 2.4875 |
| Lead Count | 64 |
| Package Type | TQFP |
| Package Width or Size | 10x10x1mm |
| Soldering Composition | Matte Tin |
Alternative Descriptions
| 64TQFP 125C, GREEN,1.6-3.6V,48MHz | Microchip Technology |
| Microchip ATSAMD21J18A-AF | RS |
| Mcu, 32Bit, Cortex-M0+, 48Mhz, Tqfp-64 | Newark Electronics |
| MCU, 32BIT, CORTEX-M0+, 48MHZ, TQFP-64 | element14 |
| SAM D21J: 256 KB Flash 32 KB SRAM 48 MHz 32-Bit Microcontroller - TQFP-64 | Future Electronics |
| MCU 32-Bit SAMD21J18A ARM Cortex M0+ RISC 256KB Flash 1.8V/2.5V/3.3V 64-Pin TQFP Tray | Avnet America |
| IC: ARM microcontroller | TME |
Frequently Asked Questions
Where can I find additional details, specifications and documents for a ATSAMD21J18A-AF?
Additional datasheets, footprints and schematics for ATSAMD21J18A-AF are listed on our Part Details page. You can also find images and similar parts to ATSAMD21J18A-AF on this page.
What pricing and inventory information can I view?
Distributor pricing and stock information is available for ATSAMD21J18A-AF on our Product Comparison page. Access via the 'View Pricing & Stock' button to view ATSAMD21J18A-AF price breaks, MOQs, lead times, inventory and SKUs from distributors.
What category does ATSAMD21J18A-AF fall under?
The ATSAMD21J18A-AF is listed under Semiconductors - ICs > More Semiconductors - ICs.
Can I view similar or alternative parts?
You can view similar parts to ATSAMD21J18A-AF when available in the More Semiconductors - ICs range under the specifications section at the bottom of the details page.
Who can I contact for technical support of the product?
Submit any questions directly to the customer support team of the distributor listing the product. For the ATSAMD21J18A-AF you can contact the distributor directly for product support, shipping queries etc.
Is the ATSAMD21J18A-AF RoHS compliant?
Yes. This part has been flagged as RoHS Compliant by Microchip Technology.
Which authorised distributors for ATSAMD21J18A-AF have stock available?
Authorised distributors including Microchip Technology, RS, Newark Electronics, element14 and Farnell have stock available or on a lead time for ATSAMD21J18A-AF.
How do I check stock and lead times for all distributors?
Stock availability and lead times will be displayed for ATSAMD21J18A-AF often in real-time on the comparison pages.
What if I can't find stock of ATSAMD21J18A-AF?
You can fill out our help required form which you can use to request a quote for ATSAMD21J18A-AF from some of our verified obsolescence suppliers. Alternatively, contact us via our web chat in the bottom left of your screen and one of our team will try to help.